What Are Flush Cut Blades Used For?

Every tradie has hit this problem: you’re cutting concrete or masonry and the standard blade just won’t reach tight enough. Whether it’s trimming a slab against a wall, squaring a paver in a corner, or breaking out concrete without damaging what’s beside it – a normal setup leaves you short.

That’s exactly what Auskut Flush Cut Blades are built for. They let you cut clean and accurate right up to the edge, with no chipping or messy patching afterwards.

What is a Flush Cut Blade?

On a standard cutting setup, the centre flange and locking nut on the grinder or saw stick out past the blade surface. That blocks you from running the diamonds perfectly flush against walls, corners, or other verticals.

Flush cut blades solve this by using a mounting design where the flange and nut sit outward, away from the cutting surface. The diamond segments extend all the way to the arbor hole, giving you a true zero-clearance profile.

The result: you can run the diamonds tight to walls, floors, or other surfaces – cutting clean to the very last millimetre.

The Top 3 Uses for Flush Cut Blades

Wall-to-Floor or Wall-to-Wall Precision Cuts

Need to remove a strip of slab for plumbing access? Cutting tiles or stone against a shower base or wall? A standard blade leaves a radius in the corner you’ll have to hammer out. Flush cut blades let you finish it in one pass – square and clean.
Cutting Into Corners and Tight Spaces

Perfect for notching lintels, trimming pavers in corners, or squaring out openings in blockwork. Flush blades get into places a normal blade setup simply can’t reach.
Removing Slabs Without Overcutting

When you’re cutting out a slab next to a driveway, foundation, or finished surface, you can’t afford overcuts. Flush cut blades let you run right alongside the structure, protecting what stays while removing what goes.

Why Choose Auskut Flush Cut Blades?

Built for contractors who need precision, Auskut Flush Cut Blades are designed for speed, durability, and accuracy:

Premium diamond segments – fast, aggressive cutting through concrete, masonry, and stone
Turbo rim design – angled grooves clear dust and slurry quickly, keeping the blade cool and cutting efficiently
True flush design – mounts for zero-clearance cutting against perpendicular surfaces
Sizes to suit your tools – available in 3″, 5″, 7″, and 9″

Auskut Flush Cut Blades

Don’t waste time chipping corners or patching messy overcuts. With an Auskut Flush Cut Blade, you’ll get the job done clean on the first pass – flush, accurate, and professional.

Explore Auskut’s range of 3″, 5″, 7″, and 9″ flush cut blades and make sure your kit is ready for the next precision job.